Library and ID cards are made in the library. The first library borrowers card is free of charge and then it will cost $1 for each new library card you want done. ID cards are more advanced and need a lot more work than library cards. They cost $5 each and you need to supply the library with a passport sized photo of the recent you. The process of making a library card is simple.
1- Turn on the laminator as this would take a while to heat up.
2-On the oasis menu type in 'A1' to get to borrower details. Press 'F' to get the find bar. Then press 'S' to type in the persons surname.
3-Once you have Found their details you need to get a library cards sheet (these sheets change colour every year. 2008=BLUE.
4-Turn the typewriter on and roll in the library cards sheet.
Typewriter
5- Get the red line on the line that you want to type on. Using the computer type in the persons name. The first letter of the first name must be in caps lock and the rest of the name in small letters. the last name must be in all caps lock. (eg. Example NAME)
6- Once you have completed step 5 roll out the cards sheet and cut out the card along the lines.
7- Once the size of the card is aproximately 7cm by 5cm place the card in a laminate sheet.
8- Put the card in the laminator (closed side in first) and wait for it to come out the other end. Put the finished card in the library card box with all the other cards yet to be collected.
9- In the persons borrower details press 'E and then go down to comments and type in pick up new library card.
10- Wait for the person to come and pick up their library card.
1- Turn on the laminator as this would take a while to heat up.
2-On the oasis menu type in 'A1' to get to borrower details. Press 'F' to get the find bar. Then press 'S' to type in the persons surname.
3-Once you have Found their details you need to get a library cards sheet (these sheets change colour every year. 2008=BLUE.
4-Turn the typewriter on and roll in the library cards sheet.
5- Get the red line on the line that you want to type on. Using the computer type in the persons name. The first letter of the first name must be in caps lock and the rest of the name in small letters. the last name must be in all caps lock. (eg. Example NAME)
6- Once you have completed step 5 roll out the cards sheet and cut out the card along the lines.
7- Once the size of the card is aproximately 7cm by 5cm place the card in a laminate sheet.
8- Put the card in the laminator (closed side in first) and wait for it to come out the other end. Put the finished card in the library card box with all the other cards yet to be collected.
9- In the persons borrower details press 'E and then go down to comments and type in pick up new library card.
10- Wait for the person to come and pick up their library card.